Author: Sam

3 Steps To Getting Rid Of Fleas And Other Pests Permanently  


cockroach eating poison

As city dwellers, it is easy for us to sometimes forget that we (and our pets) aren’t the only living creatures in the environment, and household pests can bring us back to reality real quick. Annoying at best and a health hazard at worst, pests such as roaches, fleas, and ants can really turn your home from a peaceful sanctuary to an insect battleground. Despite that being the case, many of us are quite hesitant about blasting your homes with industrial grade pesticides, some of which are known carcinogens, and while professional pest removal services (you can search for those that only use eco-friendly products, they will typically be certified by programs such as EcoWise, GreenPro, or Green Shield) are a great option, not everybody can afford to shell out for the professionals particularly in these uncertain times. Further, statistically speaking, it is the lower income households, which typically cannot afford such services which usually get pest infestations (although everybody has a risk of infestation if they do not take the necessary precautions).

The above is why in this article we will be sharing with you the three main steps you need to take to getting rid of any household pests in your home, and keep them out too.

Step 1: Sealing and Plugging

It is important to perform this step before going about eliminating the pests already in your home. Skipping this step means that the infestation is highly likely to reoccur. Before elimination, you’ll need to make sure that new pests don’t have a way to enter your home, and current pests don’t have a way to escape. You’ll need two things for this step: silicone caulk and steel wool.

We’re not going to mince details here; this step is quite tedious. You’ll need to carefully scrutinize every nook and cranny in your home, looking closely for cracks and crevices, holes in the floorboards, etc. basically any potential point of entry for pests. Remember we’re talking mostly about insects here, so even the smallest crevice is usually enough for them to worm their way through. Fill up all of these cracks and crevices with the caulk and plug any openings that are larger than a quarter of an inch across with steel wool (vermin cannot chew through steel wool). Also if there are any holes or rotting wood in your floorboards, replace them immediately before you find yourself under siege by termites.

Step 2: Elimination

The step you’ve been waiting for: vengeance. We’re going to use two items here: boric acid and diatomaceous earth. You can find both of them in your local hardware store (Boric acid may be labelled as Borax while diatomaceous earth may be labelled as Insect Dust). Boric acid is a slow acting poison to insects (fairly harmless to humans unless ingested in large quantities), while diatomaceous earth is a natural silica that works by damaging the insects’ exoskeletons as well as causing death by dehydration. It is also completely non-toxic.

You can elect to use either option or a combination of both; perhaps you have very young children or small pets and don’t wish to have boric acid around the house, which is completely understandable. One thing you must understand however is that while both these substances are highly effective at killing pests, only boric acid, as a poison, would be able to cause a chain reaction effect, meaning that ants may bring it back to their nests while in the case of roaches, which eat their dead, even one poisoned roach may be able to eliminate many more. If your roach infestation is rather serious, go to to find out how to get rid of roaches fast.

The application of either substance is fairly similar; just spread it around in thin layers (we emphasize thin here, as large clumps will just cause the insects to maneuver around it instead of treading over it) in the affected areas. It is also possible to make bait traps with these. Avoid spreading boric acid on food preparation surfaces and not that moisture causes diatomaceous earth to lose some of its effectiveness and may necessitate more frequent reapplication.

Step 3: Maintenance

Unlike the first two steps, this one is an ongoing process. You’ve sealed your house and killed off the invaders, and now it’s time to make sure that you don’t attract them again. Common sense stuff, really; mop up spills immediately, keep your dishes clean, wash your pets’ bedding at least weekly. Basically, just keep your house clean; the extra effort is worth not having to go through the headache of pest removal again.

Categories: Uncategorized

Guide To Selecting The Best Turntable

using a record playerIt’s true that you may shell out up to several thousand dollars to get a great turntable but when you’re not an audiophile, you could probably make do with a model which costs only $100. The difference within the music quality, of course, can be remarkable. This is because higher-class elements will be used to build up these types of record players and with these, a much higher amount of stability and precision could be enjoyed as well. Another significant characteristic that you need to take a look at would be its foundation. Occasionally called the plinth, here is where your whole unit rests on. If at all possible, you’ll need a plinth that’s constructed from solid wood or metal but that features a rubbery surface on particular areas of it to absorb or reduce the vibrations.

In this way, no vibrations coming from the lower body part will reverberate to the top and consequently alter the audio getting transmitted. The platter where the vinyl sits on is as critical here. For the most part, a platter that’s bulkier will vibrate a lot less and consequently this is much more desired. It is additionally a well accredited reality that there are 2 key types of drives in a turntable.

In past times, a belt driven system was the most popular selection since the motor can be found further from the platter and therefore, much less vibration will likely be passed along to the platter when the motor is turned on. A lesser amount of vibrations primarily shows that there’ll be significantly less disturbance with the music production. Within a direct drive setup, the platter is going to be spun by the motor unit directly below it. Eventually, the cons accorded by direct drive systems started to lower as the developers started to implement higher performance of dampening of vibration.

The reason’s that belt driven turntables do not have the reverse play or “scratching” feature and that function is exactly what DJs require when they are playing songs in the clubs on the turntables. Go to Down To Five – The Best Record Players And Turntables to get a complete review on the top rated turntables available right now. The truth is, that is exactly how the phrase “turntables” came to exist, since DJs will have to have manual control of these record players to spin and produce new songs from the original tracks.

vinylYou’ll in addition have the tonearm, with a tip which is swung across the platter in order to play the songs. When the platter actually starts to spin, the needle ( or stylus) that’s linked to one end of the tonearm is then lowered on top of the record. Only the tonearm aspect on its own may possibly mean the difference between a great turntable and another that is average. The tonearm functioning of the product might be automated or manual dependent upon the build itself. Automated functioning in the tonearm is made achievable through a cueing system and all you have to do to activate the songs will be to press a button. For manual systems, you’ll need to raise the tonearm and set it over the vinyl by yourself. Audiophiles typically opt for manual procedure above automatic ones given that there’ll be significantly less disturbance because of the inexistence of the extra automated components required.

The cartridge that’s attached to the device could well be one of the most critical elements right here. As an alternative, you could select a unit that presently has a cartridge pre-installed to save you the trouble of having to install one of your own. A good example here would be VPI Industries Traveler, wherein a fundamental but expensive unit of cartridge has been mounted onto the system. Inexpensive systems are often as much as $300-$400 whilst the higher-end units like the Rega RP-1 may cost up to $700. Less expensive systems that do just as well from brands like Rega can be found and you could then go on to attach a cartridge of your choice. The stylus is encased in this cartridge itself. Do not save up too much for your cartridges since a tiny change in the level of quality will bring about substantial enhancements in the performance of the whole record player.

To get a further upgrade on your music listening experience, you might want to purchase a pair of powerful speaker systems. You’ll be surprised by the massive enhancement even with an average record player. If at all possible, you wouldn’t want the sound quality to leak out via any part of the whole set of audio devices that you have and the only method to accomplish this is to have quality pieces in every step of the way. Although it isn’t required for an individual to learn every precise aspect concerning a record player’s models and technical features, it’ll help significantly if he has basic knowledge in terms of the primary parts. A general familiarity of how a record player creates audio is going to be useful. When the stylus is lowered on the spinning vinyl, audio is subsequently developed.

Categories: Turntable Reviews

How To Maintain Your Vinyl Records

cleaning a vinyl recordIf you’re an audiophile who only listens to music on record players, you will know that vinyl records are the most fragile thing in the world. Just a fingerprint or slight scratch will cause the music to be distorted. Once a vinyl record is scratched, there is really nothing much you can do to fix it besides getting a new one. That is why we are here to share with you useful ways to maintain your vinyl records so that they last even longer than you (jokes)!

The first rule that you should always follow is to thoroughly wash and dry your hands everytime you handle your vinyls. Hold the vinyl on the edges and make sure you only touch the labelled areas. Try to avoid contact with the rest of the record as there is usually oil and dirt on our fingers.

When you store your vinyl records, be sure to store them vertically next to each other instead of stacking them on top of each other. This will ensure that they do not pile up and cause damage to the record at the bottom. There are many containers specially designed to store records. Get one of those. You won’t regret it.

Categories: Vinyl Records